Help:ParserFunctions

From Homestar Runner Wiki

Revision as of 06:16, 18 March 2016 by The Knights Who Say Ni (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This wiki has an extension installed called ParserFunctions. ParserFunctions are operators that take strings of text or numbers and perform logical or mathematical operators on them. They are often used in templates, to display current times and dates, and to generate random information. Here's how to use them:

Contents

[edit] #expr:

{{#expr:}} solves mathematical expressions. It only works with numerical entries; if you want to use strings, see #ifeq.

Operator Operation Example
() Grouping operators {{#expr: (10+20) / 30 }} = 1
+ Positive {{#expr: +30 - +30 }} = 0
- Negative {{#expr: -30 + 30 }} = 0
not Unary NOT, logical NOT {{#expr: not 30 + 0}} = 0
* Multiplication {{#expr: 30 * 0 }} = 0
/ OR div Division {{#expr: -30 / 30 }} = -1
{{#expr: -30 div 30 }} = -1
+ Addition {{#expr: -30 + 30 }} = 0
- Subtraction {{#expr: 30 - 30 }} = 0
round Rounds off the number on the left to the power of 1/10 given on the right {{#expr: 24 / 49 round 4}} = 0.4898
{{#expr: 24 / 49 round 2}} = 0.49
{{#expr: 24 / 49 round 0}} = 0
= Equality (will be 1 or 0) {{#expr: 30 = 0 }} = 0
{{#expr: 30 = 30 }} = 1
<> OR  != Inequality (will be 1 or 0) {{#expr: 30 <> 0 }} = 1
{{#expr: 30 <> 30 }} = 0
{{#expr: 30 != 0 }} = 1
{{#expr: 30 != 30 }} = 0
< Less Than (will be 1 or 0) {{#expr: 30 < 0 }} = 0
> Greater Than (will be 1 or 0) {{#expr: 30 > 0 }} = 1
>= Greater Than or Equal To (will be 1 or 0) {{#expr: 30 >= 0 }} = 1
<= Less Than or Equal To (will be 1 or 0) {{#expr: 30 <= 0 }} = 0

[edit] #if:

The {{#if:}} function is an if-then-else system. If the condition string is empty, it returns the "else text". If it is not empty, it returns the "then text". The syntax is:

{{#if: <condition string> | <then text> | <else text> }}

Its most common usage is in templates, where if the user defines a parameter, then it returns some prescribed text. If the user does not specify the parameter, it returns a default. Example:

{{#if: {{{parameter|}}} | Parameter is defined | Parameter is not defined }}

If the user types {{templatename|parameter=true}} or something similar, the result is "Parameter is defined". However, if they type {{templatename}}, the result is "Parameter is not defined". Note in the above example that the expression is a special function that returns the value of the parameter if it has been defined and returns the text to the right of the vertical bar (|) if the parameter has not been defined.

{{#if:}} does not solve expressions. For example, if you type {{#if: 30 - 30 = 50 | 1 | 0 }}, the result will be 1, since 30 - 30 = 50 is not empty. If you want to do if-then-else using expressions, see #ifexpr.

[edit] #ifeq:

{{#ifeq:}} compares two strings and then performs an if-then-else process. To use:

{{#ifeq: <text 1> | <text 2> | <if equal> | <if not equal> }}

If text 1 and text 2 are equal, then it returns the <ifequal> text. Otherwise, it returns the <ifnotequal> text.

Some examples:

  • {{#ifeq: {{NAMESPACE}} | Help | This page is in the Help Namespace | This page is not in the Help Namespace }} shows up as This page is in the Help Namespace.
  • {{#ifeq: 7 | +000007.0 | Seven = Seven | Seven is not equal to Seven }} shows up as Seven = Seven

In this above example, notice that {{#ifeq:}} can treat numbers as well as strings.

{{#ifeq:}} is case-sensitive:

{{#ifeq: capital | Capital | Equal | Not Equal }} shows up as Not Equal.

[edit] #ifexist:

{{#ifexist:}} performs an if-then-else process depending on whether a page exists. Syntax:

{{#ifexist: <page name> | <if exists> | <if does not exist> }}

{{#ifexist:}} does not work with interwiki links.

Example:

{{#ifexist: sbemail | [[Strong Bad Email]] | [[Main Page]] }} returns Strong Bad Email because a page named "sbemail" does exist.

[edit] #ifexpr:

{{#ifexpr:}} is an if-then-else routine that, like {{#expr:}}, can only be used with numbers. Syntax:

{{#ifexpr: <expression> | <if true> | <if false> }}

Some examples:

  • {{#ifexpr: 7 + 8 = 15 | yes | no }} returns yes.
  • {{#ifexpr: 7 + 8 = 78 | yes | no }} returns no.
  • {{#ifexpr: {{PAGENAME}} = ParserFunctions | This is a help page | No}} returns the error Expression error: Unrecognised word "parserfunctions" because "ParserFunctions" (the text returned by {{PAGENAME}}) is a string, not a number.

[edit] #switch:

{{#switch:}} compares a number or a string against many items, and returns a result corresponding to the item it matches. Syntax:

{{#switch: <value>
| <result 1> = <text if 1 is true>
| <result 2> = <text if 2 is true>
| <result 3> = <text if 3 is true>
| <result 4> = <text if 4 is true>
| #default = <default value if none are true>
}}

If <value> matches <result 2>, for example, <text if 2 is true> will be returned by the function. If <value> does not match any of the first four items, <default value if none are true> will be returned.

"| <result n> = <text if n is true>" can be repeated as many times as necessary. However, "#default" can only be used once.

It is also possible to have "fall-through":

{{#switch: <value>
| <result 1>
| <result 2>
| <result 3> = <text if 1, 2, or 3 is true>
| <result 4> = <text if 4 is true>
| #default = <default value if none are true>
}}

<result 1> and <result 2> do not have equal signs, and if <value> matches either of them, the text corresponding to <result 3> will be returned.

Example:
{{#switch: {{#rand: 1|10}}
|1
|2
|3
|4
|5= This number is 1-5
|6= This number is 6
|7= This number is not 8
|8= This number is 1 more than 7
|9
|10= This is either 9 or 10
}}

turns out as This number is 1-5.

[edit] #time:

{{#time:}} is used for time and date formatting. It can be used to show the current time or day, or a set time or day in a certain format. Either way, here are the codes (following UTC):

Code What it is Possible results Currently
Y 4 digit year 1970-2038 2019
y 2 digit year 00-99 19
n Month number 1-12 2
m Month number, with leading 0 01-12 02
M Month name, abbreviated Jan-Dec Feb
F Full month name January-December February
W Current week of the year 1-52 or 53, depending on year 08
j Day of the month 1-31 24
d Day of the month, with leading 0 01-31 24
z Day of the year 0-364, 365 on a leap year 54
D Day of the week, abbreviated Mon-Sun Sun
l Full day of the week Monday-Sunday Sunday
N ISO 8601 day of the week 1 (Monday) - 7 (Sunday) 7
w American day of the week 0 (Sunday) - 6 (Saturday) 0
a am or pm (lowercase) am-pm am
A AM or PM (capital) AM-PM AM
g 12 hour format of the hour 1-12 3
h 12 hour format of the hour, with leading 0 01-12 03
G 24 hour format of the hour 0-23 3
H 24 hour format of the hour, with leading 0 00-23 03
i The minute 00-59 45
s The second 00-59 14
U Seconds since Midnight on January 1, 1970 0-∞ 1550979914
L Whether it's a leap year 0 if not, 1 if yes 0
t Days in the month 28-31 28

If any input other than those discussed above is provided, it will pass through the function unmodified. So, links and punctuation can be easily used with this function. Examples:

  • {{#time: l j F Y }} generates Sunday 24 February 2019.
  • {{#time: m/Y }} generates 02/2019.
  • {{#time: H:i | - 6 hours}} generates 21:45, 6 hours before the current time
  • {{#time: l Y-m-d }} generates Sunday 2019-02-24.
  • {{#time: l }} generates Sunday.
  • {{#time: z | 20071031}} generates 303, Halloween day in "z" format

[edit] #rand:

{{#rand:}} generates a random integer. (It has been discontinued in standard versions of ParserFunctions, but the Homestar Runner Wiki uses a custom version that includes {{#rand:}}.) Syntax:

{{#rand: <minimum> | <maximum> }}

The minimum is the smallest integer it can generate, the maximum is the largest.

Examples:

  • {{#rand: 1 | 50 }} generates 42.
  • {{#rand: 1 | 500000 }} generates 173061.
  • {{#rand: -10 | -1 }} generates -3.
  • {{#rand: .1 | .9 }} generates 0, because it rounds the magnitude of the input down to the nearest integer (in this example, both the minimum and maximum values are 0).

[edit] #count:

count is a parser function that returns an integer that increments each time the function is called.

For more information please read the Counter help page.

[edit] See Also

Personal tools